Akanksha Enterprises

Myk Laticrete Sp-100&trade; Tile Joint Is a Stain Resistant, Water Resistant &amp; Germ Resistant Grout for Floor &amp; Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.<br />Features &amp; Benefits<br />100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal<br /><br />Product DetailsPackaging Net Weight 1/5th Unit - 1 KG &amp; 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C)&nbsp;<br />Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg<br />How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60&deg;F (16&deg;C) and 90&deg;F (32&deg;C).Mixing&nbsp;Empty Entire Contents of Latapoxy&reg; Sp-100 Stain Free Grout Part &ldquo;A&rdquo; and Part &ldquo;B&rdquo; Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least &frac34; of Myk Laticrete Sp-100 Tile Joint Part &ldquo;C&rdquo; Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90&deg; Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile &amp; Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100&trade; Tile Joint Is a Stain Resistant, Water Resistant &amp; Germ Resistant Grout for Floor &amp; Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.<br />Features &amp; Benefits<br />100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal<br /><br />Product DetailsPackaging Net Weight 1/5th Unit - 1 KG &amp; 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C)&nbsp;<br />Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg<br />How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60&deg;F (16&deg;C) and 90&deg;F (32&deg;C).Mixing&nbsp;Empty Entire Contents of Latapoxy&reg; Sp-100 Stain Free Grout Part &ldquo;A&rdquo; and Part &ldquo;B&rdquo; Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least &frac34; of Myk Laticrete Sp-100 Tile Joint Part &ldquo;C&rdquo; Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90&deg; Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile &amp; Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

This is a highly polymer modified and highly flexible adhesive for installation of large format/ slim tiles on most of the substrates to accommodate movements. It offers very good handling properties with good sag and slump resistance while doing installation on wall or floor respectively. It can be applied up to 18 mm bed thickness.&lt;br /&gt;&lt;br /&gt;&lt;b&gt;Features and Benefits:&lt;/b&gt; &lt;ul&gt; &lt;li&gt;Light weight formula- 15% higher coverage than standard adhesive&lt;/li&gt; &lt;li&gt;High strength with high polymer modification&lt;/li&gt; &lt;li&gt;Good resistance against crack propagation&lt;/li&gt; &lt;li&gt;Good impact resistance- provides cushion effect to tiles&lt;/li&gt; &lt;/ul&gt; &lt;br /&gt;&lt;b&gt;Certification:&lt;/b&gt; &lt;ul&gt; &lt;li&gt;ANSI: A 118.4 ET&lt;/li&gt; &lt;li&gt;EN: 12004/ ISO 13007: C2TE S1&lt;/li&gt; &lt;li&gt;IS 15477 : 2019: TYPE 3 TS 1 Adhesive&lt;/li&gt; &lt;li&gt;VOC: Practically Nill&lt;/li&gt; &lt;/ul&gt; &lt;br /&gt;&lt;b&gt;How to apply:&lt;br /&gt;&lt;/b&gt;&lt;br /&gt;&lt;b&gt;Substrate:&amp;nbsp;&lt;br /&gt;&lt;/b&gt;The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls &amp;ndash; 3mm in 2.5m Floors &amp;ndash; 1.5mm in 1.0m&lt;br /&gt;&lt;br /&gt;&lt;b&gt;Surface Preparation:&amp;nbsp;&lt;br /&gt;&lt;/b&gt;All surfaces should be between 50&amp;deg; F(10&amp;deg;C) and 100&amp;deg; F(38&amp;deg;C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Key to have easy and proper installation of the large format or thin/slim porcelain tiles is the preparation of the surface and complete removal of demolding wax powder on the back surface of the tile. Should there be a fiber mesh present on the back surface of the tile, ensure that it is completely removed before proceeding with the installation using Laticrete 335 Maxi.&amp;nbsp;&amp;nbsp;&lt;br /&gt;&lt;br /&gt;&lt;b&gt;Mixing:&amp;nbsp;&lt;br /&gt;&lt;/b&gt;Place clean, potable water into a clean mixing bowl. Add LATICRETE 335 Maxi powder into the mixing bowl. Use approximately 8.25 &amp;ndash; 8.75L of water for 25 kg of powder. Use a low speed paddle drill mixer to get a smooth, paste-like consistency. Let the mixture slake or stand 5-10 minutes; stir again and use. Stir occasionally, but do not add more water. When properly mixed, troweled ridges will stand without slump.&lt;br /&gt;&lt;br /&gt;&lt;b&gt;Suitable Tile Type:&lt;/b&gt; &lt;ul&gt; &lt;li&gt;Slim porcelain large format tiles&lt;/li&gt; &lt;li&gt;Vitreous, semi vitreous or non- vitreous tiles; ceramic; quarry, cement body tile&lt;/li&gt; &lt;li&gt;Brick&lt;/li&gt; &lt;li&gt;Cement based precast terrazzo&lt;/li&gt; &lt;li&gt;Natural stone tile&lt;/li&gt; &lt;/ul&gt; &lt;b&gt;&lt;br /&gt;&lt;br /&gt;&lt;/b&gt;

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.<br />

<p>The multipurpose high polymer, flexible modified thin-set mortar for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and brick. LATICRETE® 335 Super Flex Multipurpose Floor & Wall Tile Adhesive is designed to mix with water, has a convenient open time with high adhesion and workability.

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

A factory-made bagged cementitious polymer based powder, containing Portland cement
and silica sand, it can be mixed with water for installing small and medium size ceramic floor
tiles in interior areas using the thinset method of installation.

Data Sheets LATAFIX 305   Features & Benefits

 

• For fixing cermic tiles on interior floor & wall
• Ideal for new floor tiling
• Economical & easy to use
• Single component - Just add water

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100&trade; Tile Joint Is a Stain Resistant, Water Resistant &amp; Germ Resistant Grout for Floor &amp; Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.<br />Features &amp; Benefits<br />100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal<br /><br />Product DetailsPackaging Net Weight 1/5th Unit - 1 KG &amp; 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C)&nbsp;<br />Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg<br />How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60&deg;F (16&deg;C) and 90&deg;F (32&deg;C).Mixing&nbsp;Empty Entire Contents of Latapoxy&reg; Sp-100 Stain Free Grout Part &ldquo;A&rdquo; and Part &ldquo;B&rdquo; Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least &frac34; of Myk Laticrete Sp-100 Tile Joint Part &ldquo;C&rdquo; Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90&deg; Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile &amp; Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

Myk Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.

 

Features & Benefits

 

100% Stainfree

Strong and Durable

Chemical and Temperature Resistant

Anti-bacterial and Anti-fungal

 

 

Product Details

Packaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 

 

Color Available in a Range of More Than 40 Colours Certification

Ansi: A 118.3

En 13888: Rg

 

How to Apply

Surface Preparation:

Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.

Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.

Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).

Mixing 

Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.

Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.

Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.

Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.

Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.

Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.

Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable Substrates

Not Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

Myk Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.

 

Features & Benefits

 

100% Stainfree

Strong and Durable

Chemical and Temperature Resistant

Anti-bacterial and Anti-fungal

 

 

Product Details

Packaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 

 

Color Available in a Range of More Than 40 Colours Certification

Ansi: A 118.3

En 13888: Rg

 

How to Apply

Surface Preparation:

Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.

Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.

Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).

Mixing 

Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.

Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.

Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.

Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.

Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.

Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.

Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable Substrates

Not Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

weberfix PU is a two-component, ready to mix, polyurethane-based thin-set adhesive for fixing all types of tiles and stones on a variety of substrates including metal surfaces and drywall boards. weberfix PU is suitable for application on the interior as well as exterior wall and floor.Features and benefits 

• Suitable for tile and stone cladding on high rise buildings.
• No Spacer required if adequate constructions joints are provided in tile and stone cladding.
• For internal as well as external wall and floor.
• Very High Bond strength and chemical resistance.
• Apply on substrates including wood, metals, rubber, PVC, linoleum.
• Suitable for heated subfloors and areas subjected to thermal shock and freezing.
• Ideal for tiles and stones prone to deformation due to water absorption and thermal expansion.
• Suitable to install all tiles and stones including glass** and metal tiles.
• Weberfix PU can be used for new construction as well as for renovation over existing floors and walls.
• No hacking of substrate is required to achieve the bonding.
• No shrinkage, prevents debonding and gives longer life to tiles and stones.
• No sag formula: allows for hassle free application on vertical walls, without any slippage.
• Moisture free system : Does not damage wooden substrates or tiles, and water sensitive stone like green marble.
• Reaction based system, and thus not harshly affected by temperature & humidity.
• Useful for bed thickness of 3-6mm. May go upto 10 mm in limited extent.
• Two Component adhesive : prevents wastage, as only quantity which is required has to be mixed.
• Weberfix PU can be used on touch dry surface of concrete. Do not need to wait for substrate to get completely dry.
• Easy workability.

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

Prices Will Vary According to the product , Please Connect for More Details for Purchasing, We Have Good Quality of product.

Flexible mineral adhesive to fix vitrified tiles and natural stones on floor and wall.

• Highly polymer‑modified
• For balconies and terraces
• Prolonged workability

MYK Laticrete Sp-100™ Tile Joint Is a Stain Resistant, Water Resistant & Germ Resistant Grout for Floor & Wall. Myk Laticrete Sp-100 Tile-Joint Is Suitable for Ceramic Tiles, Vitrified Tiles, Marble and Stone, Especially in Stain Prone Areas Such as Kitchens and Washrooms.
Features & Benefits
100% StainfreeStrong and DurableChemical and Temperature ResistantAnti-bacterial and Anti-fungal

Product DetailsPackaging Net Weight 1/5th Unit - 1 KG & 1 Unit - 5 KG. Factory Proportioned Unit Consisting of Three Conveniently Packed Components - Hardner, Resin (Part a and Part B) and Coloured Filler Powder (Part C) 
Color Available in a Range of More Than 40 Colours CertificationAnsi: A 118.3En 13888: Rg
How to ApplySurface Preparation:Before Starting to Grout, Remove Debris in Grout Joints and Lightly Sponge the Tile Surface to Remove Dust and Dirt.Do Not Clean Tiles With Acid Cleaners. In Case Acid Cleaners Were Used to Clean the Tiles, Ensure to Wash the Area With Plenty of Water Before Commencing Grouting.Substrate Temperature Must Between 60°F (16°C) and 90°F (32°C).Mixing Empty Entire Contents of Latapoxy® Sp-100 Stain Free Grout Part “A” and Part “B” Container Into a Clean Mixing Pail.Mix With a Margin Trowel or a Slow Speed Drill Mixer Until Liquids Are Completely Blended. Add at Least ¾ of Myk Laticrete Sp-100 Tile Joint Part “C” Filler Powder and Mix to a Uniform Consistency.Add the Remaining Filler Powder and Mix to Achieve a Stiff Mix to Work Into the Joints.Immediately Pour Entire Contents of Bucket Onto Working Area. Use a Plastic Sheet as a Drop Cloth. Use Standard Epoxy Grouting Techniques to Work With Sp-100 Tile Joints.Sp-100 Tile Joint Can Also Be Applied With a Caulking Gun. Be Sure All Grout Joints Are Packed Full.Remove as Much Excess Material as Possible Before Initial Cleaning With Grout Float. Do Not Leave Excess Grout on the Face of Tiles.Cleaning Remove Excess Grout From the Face of the Tiles With the Edge of the Grout Float. Hold the Float at a 90° Angle and Pull It Diagonally Across the Joints and Tile to Avoid Pulling out the Material. Initial Cleaning: After 30-45 Min of the Application of the Grout Scrub the Surface of the Tile & Joint With Clean Water and Scrubber Provided to Remove Any Excess Grout. Then Take a Clean Thick White Towel and Drag Across the Tile to Remove Any Residue. Final Cleaning: Within 24 Hours Do a Second Cleaning With Normal Soap Detergent to Remove Any Haze From the Tile. Areas of Application Kitchens, Bathrooms, Swimming Pools, Fountains, Water Bodies, Hospitals,Operation Theatres, Sterilization Rooms, Restaurants, Cafeterias, Light Industrial Applications and High Traffic Areas. Suitable SubstratesNot Mentioned

Multipurpose Gel‑Adhesive, structural, flexible, thixotropic & fluid. For ceramic, porcelain and natural stone of all types and formats.

• High adhesion and deformability
• Excellent workability
• Ideal for facades, swimming pools and heavy foot traffic environments
• Suitable for residential, commercial and infrastructure project

Adhesive for fixing ceramic tiles indoor and outdoor areas.

• Walls and floors
• Adjustable
• No sag

Rating 4

Water‑based elastic agent for normal‑ and rapid‑setting mineral adhesives.Top Latex Eco increases the longitudinal and transversal deformation of adhesives, guaranteeing unaltered workability and safe, easy laying.

• Increases substrate adhesion
• Recommended as an additive for substrates and materials subject to extreme deformation
• Does not alter workability times of normal and extra‑fast setting mineral adhesives

Mineral slurry adhesive to fix vitrified tiles and natural stones of all types and formats on floor using the wet‑on‑wet technique.

• Full coverage
• Easy to use
• Ensured adhesion

High performance deformable adhesive for bonding large format tiles and natural stones.

• Highly polymer modified
• Thicknesses up to 15 mm
• For internal and external use
• High deformability
• Prolonged workability
• Adjustable
• For fixing large format tiles and natural stones
• Ideal for civil, commercial and industrial projects

Rating 4

Mineral adhesive for fixing ceramic tiles, vitrified tiles and stones on floor and wall.

• Polymer‑modified
• Ideal for walls
• Ideal for wet areas

Rating 4

Eco‑friendly, elastic organic mineral adhesive for high‑performance and high‑adhesion fixing with no vertical slip on deformable surfaces.Superflex develops high elasticity and non‑sag effect making it safe to fix water‑sensitive ceramic tiles and natural stone even diagonally or from top to bottom on highly deformable and expandable, absorbent and non‑absorbent substrates.

• Floors and walls, for internal and external use
• Open and adjustability time ≥ 30 min.
• Suitable for vitrified tiles, ceramics, large formats, low thickness slabs and natural stone
• Ideal for marble and natural stone that tends to form stains and sag in the presence of humidity
• Ideal for resin‑based engineered stones
• Easy and light to spread thanks to the Light Work technology